FNET CableIQ Advanced IT Kit
  2.45520 inc. VAT
  • ManufacturerFluke Networks
  • DispatchIn Stock
  • Guarantee1 year

Fluke Networks Fluke Networks CIQ-KIT CableIQ qualification tester is the first cabling bandwidth tester for network technicians. This network cable tester gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.
Copper qualification tester troubleshoots and qualifies cabling speed (10/100/1000/VoIP).

Main Features

  • Qualifies - Tests if your existing network cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
  • Troubleshoots - shows why existing network cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters)
  • Discovers - detects what's at the end of any network cable and displays device configuration (speed/duplex/pairing)
  • Identifies unused switch ports that can be reallocated
  • Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
  • Tests all copper cabling media: twisted-pair, coax, and audio cabling


  • MICRO-DIT Micro IT kit soft carry duffle
  • CIQ-COAX CableIQ Coax Adapter Kit includes F-connector, BNC and RCA connectors
  • CIQ-IDK24 CableIQ Remote Identifier Kit includes remote identifier numbers 2-4
  • CIQ-IDK57 CableIQ Remote Identifier Kit includes remote identifier numbers 5-7
  • CIQ-RJA RJ45/11 Modular Adapter
  • CIQ-SPKR CableIQ Speaker Wire Adapter
  • CIQ-WM CableIQ Main Wiremap Adapter (replacement part for lost or damaged unit)
  • CLIP-SET Clip Set includes RJ45 to 8-clip test lead
  • MT-8200-63A IntelliTone 200 Probe Includes: IntelliTone 200 Probe, RJ11 and RJ 45 patch cables, lanyard, quick start guide, and 9 volt battery

CableIQ Advanced IT Kit Includes
CableIQ main unit with remote adapter, CableIQ Reporter software CD, IntelliTone 200 Digital Probe, Remote IDs #2-7, (2) RJ45-RJ45 patch cord, USB cable, coax 'F' push-on adapter, 75-ohm coax patch cord, RJ45/11 universal coupler, RJ11-RJ11 patch cord, owners CD and quick start guide, (4) AA batteries, test accessory soft pouch, hard carry case

See the Video

See the catalog

Cable Types SupportedUTP, STP, FTP, SSTP, RG6, RG59, audio and security
Qualification Autotests1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax
Supported TestsWiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.
WiremapCan detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.
Find FaultMeasures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application
Results StorageUp to 250 qualification test results
Physical Specifications
Power SourceBattery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life20 hours of typical use, without backlight
Other battery types supported4AA photo lithium, NIHM, NICAD
Dimentions and Weight17.8cm x 8.9cm x 4.5cm, 0.55 kg

Product in Promotion!

The listed price is the current special promotional price of this product. This price is valid for a limited period and/or for a limited number of products. Ask for your Quote !


Products you saw

Αυτό είναι το πρώτο σας...

Technical Support

Do you have a question regarding Fluke Networks CableIQ;

Please Contact Us!

Keysight EXR series Oscilloscopes
(C) NetScope Solutions - All Rights Reserved
page generated in 149ms (27 queries, 49ms)
powered by zoglair